The RD44® was designed to adhere to the Health and Safety at Work Act 1974 where safe ingress and egress is required for personnel at all times.
The RD44® can be used on any flare boom and has been designed to ensure a clear pathway for personnel is achieved at all times.
No crane operations are required which will reduce the risk of NPT during well test operations.
There are 20 safety initiatives designed into the RD44® when used with the Free Flow Nozzle™.
Over 20 Years of lessons learned and problems encountered have gone into the design which holds full patent status.
The RD44® was designed to adhere to the Health and Safety at Work Act 1974 where safe ingress and egress is required for personnel at all times.
The RD44® can be used on any flare boom and has been designed to ensure a clear pathway for personnel is achieved at all times.
No crane operations are required which will reduce the risk of NPT during well test operations.
There are 20 safety initiatives designed into the RD44® when used with the Free Flow Nozzle™.
Over 20 Years of lessons learned and problems encountered have gone into the design which holds full patent status.
The RD44® is installed onshore to avoid crane operations offshore.
It has been used on the Halliburton Flare Boom, The Expro Flare Boom and the Schlumberger Flare Boom where safety and efficiency was recorded by the operators
Not only is the Health and Safety at Work Act 1974 adhered to but the risk of Slips, Trips, Falls, Pinch Points, Back Injury and Struck by Loads are ALL Reduced to as Low as Reasonably Practical.
Two Handrails and a Walkway is specifically designed into all flare booms to allow for safe passage for the Well Test Operators.
This is a Halliburton Well Test Flare Boom designed to allow for safe passage for personnel.
The RD44® is installed onshore to avoid crane operations offshore.
It has been used on the Halliburton Flare Boom, The Expro Flare Boom and the Schlumberger Flare Boom where safety and efficiency was recorded by the operators
Not only is the Health and Safety at Work Act 1974 adhered to but the risk of Slips, Trips, Falls, Pinch Points, Back Injury and Struck by Loads are ALL Reduced to as Low as Reasonably Practical.
Two Handrails and a Walkway is specifically designed into all flare booms to allow for safe passage for the Well Test Operators.
This is a Halliburton Well Test Flare Boom designed to allow for safe passage for personnel.
The RD44® allows for the Health and Safety at Work Act 1974 to be achieved on ALL Flare Boom used for Well Testing.
A walkway less than One Metre wide located over open water at height is a dangerous enough place to work so why would anyone introduce hazards and risks when they do not have to?
The very basics of safety are achieved through the RigDeluge® Safety Innovation.
Independently Certified and Proven Patented & Patent Pending Technology.
This is a Schlumberger Well Test Flare Boom which is designed to allow for safe passage.
The RD44® allows for the Health and Safety at Work Act 1974 to be achieved on ALL Flare Boom used for Well Testing.
A walkway less than One Metre wide located over open water at height is a dangerous enough place to work so why would anyone introduce hazards and risks when they do not have to?
The very basics of safety are achieved through the RigDeluge® Safety Innovation.
Independently Certified and Proven Patented & Patent Pending Technology.
This is a Schlumberger Well Test Flare Boom which is designed to allow for safe passage.
The RD44® ensures that even when the cranes do not reach the flare boom landing position there is no non-productive time recorded with swinging in the flare booms to reach the old-style rig cooling systems.
This is an Expro Well Test Flare Boom that is designed for a safe passage which as you can see, the RD44® allows this to be achieved.
The RD44® ensures that even when the cranes do not reach the flare boom landing position there is no non-productive time recorded with swinging in the flare booms to reach the old-style rig cooling systems.
This is an Expro Well Test Flare Boom that is designed for a safe passage which as you can see, the RD44® allows this to be achieved.
The RD44® has an adaptable stand which will allow it to be used on Flare Booms that have no Structurally Based Hand Rails.
These are typically fixed rig flare booms built into the asset.
A clear walkway is how the Flare Booms are designed and that’s the way they can now stay.
No more, heavy walkway blocking systems are required.
Engineering, Efficiency, and Innovation Achieved.
The RD44® has an adaptable stand which will allow it to be used on Flare Booms that have no Structurally Based Hand Rails.
These are typically fixed rig flare booms built into the asset.
A clear walkway is how the Flare Booms are designed and that’s the way they can now stay.
No more, heavy walkway blocking systems are required.
Engineering, Efficiency, and Innovation Achieved.
As you can see here the Well Test flare boom walkway is being worked on at height and over open water.
Due to the utilization of the RD44®, these operators are afforded safe ingress and egress as required by HSE legislated law.
It takes administrative controls to allow a hazard to be introduced to the walkway which in return will add a magnitude of hazards and risks to the operators in this already hazardous area.
The RD44® is an engineered solution to replace administrative controls.
As you can see here the Well Test flare boom walkway is being worked on at height and over open water.
Due to the utilization of the RD44®, these operators are afforded safe ingress and egress as required by HSE legislated law.
It takes administrative controls to allow a hazard to be introduced to the walkway which in return will add a magnitude of hazards and risks to the operators in this already hazardous area.
The RD44® is an engineered solution to replace administrative controls.
The RD44®, when used with the Six Inch Free Flow Nozzle™, becomes the safest and most efficient flare boom cooling system in the World.
The RD44® can be retrofitted to any flare boom and is Patented Technology born through Problems Encountered and Lessons Learned during Well Test Operations.
There are 20 Reasons why you would want to use the system instead of the first and second generation systems.
The Inventor Ian Garden was involved in the Development of all three variations and has proven that this third generation system is truly globally unique with Patent Awards.
It has been made available through purchase or rental to all rig cooling/heat suppression companies along with all Well Test Companies to allow the safety improvement to become an industry standard.
The RD44®, when used with the Six Inch Free Flow Nozzle™, becomes the safest and most efficient flare boom cooling system in the World.
The RD44® can be retrofitted to any flare boom and is Patented Technology born through Problems Encountered and Lessons Learned during Well Test Operations.
There are 20 Reasons why you would want to use the system instead of the first and second generation systems.
The Inventor Ian Garden was involved in the Development of all three variations and has proven that this third generation system is truly globally unique with Patent Awards.
It has been made available through purchase or rental to all rig cooling/heat suppression companies along with all Well Test Companies to allow the safety improvement to become an industry standard.
A choice to Install a Hazard and Introduce a magnitude of Risks.
Break HSE Law and block the safe access and egress along a flare boom walk way positioned over the side of the rig, at height and over open water.
This was only ever allowed as there was no other choice until the RD44® was Invented.
The picture above shows an EXPRO Well Test Operator in harms way and struggling along a flare boom.
The one below is a Schlumberger Operator struggling along the flare boom walk way with hose underfoot.
Hazards should NEVER be introduced or worse re-introduced when they can be mitigated.
The RD44® is an Engineered Solution which Mitigates the Hazard and in return reduces the risks.
Safe Access and Egress while at the same time reducing the risks :
- Slips
- Trips
- Falls
- Pinch Points
- Struck by Load
- Back Injury
- Ankle Injury
- Crane Operations
Risks Reduced to as Low as Reasonably Practical.
The main aim of a Hazz-Op & Hazz-Id is to achieve this and the Old Systems should NEVER get past this point when there is an Engineered Solution.
Free Flow Technology™
